99 A PLUS GROUP Co., Ltd.

LEWITT รุ่น LCT 940

฿72000.00
Sound professionals naturally rely on a set of different high-end microphones in order to get the best out of their sound. But changing microphones and adjusting settings takes valuable time
ซื้อเลย
หยิบลงตะกร้า
  • หมวดหมู่ : LEWITT
  • รหัสสินค้า : 000638

รายละเอียดสินค้า LEWITT รุ่น LCT 940

Acoustical operating principle pressure gradient transducer,
  • externally polarized
  • Transducer Ø 25,4 mm
  • 1 inch
  • Directional pattern omni
  • broad-cardioid
  • cardioid
  • super-cardioid
  • figure-8 and four additional intermediate pattern
  • selectable on remote control
  • Frequency range 20 ... 20.000 Hz
  • Sensitivity 23 mV / Pa (-33 dBV), cardioid
  • 20 mV / Pa (-34 dBV), omni
  • 23 mV / Pa (-33 dBV), figure-8
  • Signal / noise ratio (FET) 86 dB-A
  • Signal / noise ratio (Tube) 82 dB-A
  • Equivalent noise level (FET) 8 dB-A, cardioid (IEC 61672-1)
  • 9 dB-A, omni (IEC 61672-1)
  • 8 dB-A, figure-8 (IEC 61672-1)
  • Equivalent noise level (Tube) 12 dB-A, cardioid (IEC 61672-1)
  • 13 dB-A, omni (IEC 61672-1)
  • 12 dB-A, figure-8 (IEC 61672-1)
  • Dynamic range of FET mic. Amp. 135 dB-A
  • Dynamic range of Tube mic. Amp. 128 dB-A
  • Max. SPL for 0,5 % THD (FET) 143 dB, 0 dB pre-attenuation
  • 149 dB, 6 dB pre-attenuation
  • 155 dB, 12 dB pre-attenuation
  • 161 dB, 18 dB pre-attenuation
  • Max. SPL for 0,5% THD (Tube) 140 dB, 0 dB pre-attenuation
  • 146 dB, 6 dB pre-attenuation
  • 152 dB, 12 dB pre-attenuation
  • 158 dB, 18 dB pre-attenuation
  • Pre-attenuation pad 6 dB
  • 12 dB
  • 18 dB
  • selectable on remote control
  • Bass cut filter slope 12 dB / octave at 40 Hz
  • 6 dB / octave at 150 Hz
  • 6 dB / octave at 300 Hz
  • selectable on remote control
  • Rated impedance < 200 ohms
  • Rated load impedance > 1.000 ohms
  • Supply voltage custom power supply unit
  • 230 V, 50 Hz
  • 110 V, 60 Hz
  • Current consumption 170 mA
  • Connector gold plated 11-pin XLR
  • Cable 8 m (26 ft)
  • 11-pin audio cable
  • oxygen-free copper
  • Dimensions (Mic) 192 x 60 x 46 mm
  • 7,5 x 2,4 x 1,8 inch
  • Dimensions (PSU) 250 x 150 x 70 mm
  • 9,8 x 5,9 x 2,8 inch
  • Net weight (Mic) 662 g
  • 23,3 oz
  • Net weight (PSU) 1930 g
  • 68,1 oz