99 A PLUS GROUP Co., Ltd.

Magewell XI100DUSB-HDMI HDMI to USB 3.0 Video Capture Dongle

฿0.00

จำนวน

หมวดหมู่ : Streaming Box / Facebook Live
รหัสสินค้า : 001185

รายละเอียดสินค้า Magewell XI100DUSB-HDMI HDMI to USB 3.0 Video Capture Dongle

Magewell XI100DUSB-HDMI HDMI to USB 3.0 Video Capture Dongle

Record or stream an HDMI signal via USB 3.0 with the Magewell XI100DUSB HDMI USB 3.0 Capture Dongle. With its HDMI v1.4a input, this capture device will accept resolutions of up to 2048×2160 at 60p. If you need to stream or record at a certain resolution, the XI100 will internally up or down-covert the input signal to the set resolution. It can also perform frame-rate conversion and de-interlacing in real-time with its own hardware, taking the processing load off of your computer's CPU.

Because the XI100 uses the existing drivers on your computer, the capture device will work with any software that supports those drivers. If you don't have a USB 3.0 port available, the XI100 will work with a USB 2.0 port, although the resolution and frame rate capabilities will be reduced due to the restricted bandwidth.

No drivers needed for Windows, Mac, or Linux
Automatically determines input video format and converts it to the specified output size and frame rate
Automatically converts input audio formats to 48 KHz PCM stereo audio
64MB of DDR2 onboard memory to control frame buffer and avoid interruption or dropped frames when USB bandwidth is occupied

Supported OS	Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64) Linux (Ubuntu 12.04–16.10, CentOS 7) OS X 10.9–10.11 macOS 10.12
Supported APIs	Windows DirectShow Wave API/DirectSound/WASAPI Linux V4L2 ALSA OS X/macOS QuickTime AV Foundation
Supported Software	VLC VirtualDub OBS XSplit vMix VidBlaster Wirecast Microsoft Media Encoder Adobe Flash Media Encoder Any other DirectShow, V4L2, QuickTime,AV Foundation based encoding or streaming software
Input Interfaces	HDMI DVI-D 1.0 HDMI 1.3
Host Interfaces	USB 3.0 compatible with USB 2.0 compatible with USB 3.1 Gen 1
Input Features	Support for input video resolutions up to 2048×2160
HDMI Specific Features	165MHz HDMI receiver Adaptive HDMI equalizer support for cables lengths up to 30M Support for customized EDID Support for extraction ofAVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames Full colorimetry support Support for 8/10/12-bit color depth Support for RGB 4:4:4，YCbCr 4:4:4，YCbCr 4:2:2 color sampling Support for 2-channel ISC60958 audio streams Support for extraction of audio formation information & channel status data Support for extraction of video timing information Support for extraction of 3D format information Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode
Video Capture format	Support for capture resolutions up to 2048×2160 Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency. Typical capture frame rates on the Intel USB 3.0 controller are as follows.) 1920×1080 YUY2 (up to 75fps) 1920×1080 RGB24 (up to 60fps) Support for YUY2 & UYVY4:2:2 8-bit Support for RGB24 & RGB32 4:4:4 8-bit The default capture format is YUY2. More capture format can be set using USB Capture Utility.
Video Processing Features	Video processing pipelines with 160 Mpixels/s processing bandwidth Video cropping Video scaling Video de-interlacing Weave Blend top & bottom field Top field only Bottom field only Video aspect ratio conversion Auto or manual selection of input aspect ratio Auto or manual selection of capture aspect ratio Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox) Video color format conversion Auto or manual selection of input color format & quantization range Auto or manual selection of capture color format, quantization range & saturation range Support for RGB, YCbCr 601, YCbCr 709 color formats Support for Limited or Full quantization range Support for Limited, Full & ‘Extended gamut’ saturation range Video frame rate conversion Vertical flip and mirror
Multiple devices on one computer	Support for connecting multiple USB devices to one system Support for setting the device serial number as the device name shown in the system using USB Capture Utility
SDK	The USB Capture SDK provide functions including signal status extraction, capture configuration, etc.
Firmware Upgrade	Multiple devices in one system can be upgraded simultaneously
LED Indicator	Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.
Form Factor	92.2mm (L) x 40.2mm (W) x 12.3mm (H)
Accessories	USB 3.0 cable
Power Consumption	5V max current: ~0.5 A max power consumption：~2.5 W
Working Environment	Operating temperature: 0 to 50 deg C Storage temperature: –20 to 70 deg C Relative Humidity: 5% to 90% non-condensing